Home » Optics » 5 properties of light in physics

5 properties of light in physics

What is light and what does it consists of ?

 Light is a form of energy which is given by luminous objects.The Sun,bulb,candle,etc.are luminous objects.Other objects which do not give out light are called non luminous objects.Light can pass through transparent materials.Glass,water,clear plastic and air are transparent materials.Light can not pass through translucent materials.A tracing paper,frosted glass and waxed paper are translucent materials.

Light behaves differently when it falls on different objects.When light falls on the surface of a non luminous object,it can behave in three ways:properties of light

  1. When light falls on transparent objects,it is transmitted to the other side.That is why,we can see across transparent objects.
  2. When light falls on rough opaque objects,most part of this light is absorbed and changed into heat energy.A black surface absorbs most of the light.
  3. When light falls on a smooth shiny surface,it bounces off in one particular direction.This bouncing off of light  is called reflection of light.

Light travels in straight line:

In a homogeneous isotropic medium light rays always travel in straight lines.Technically this is called rectilinear propagation of light.Pinhole camera is the best example of this rule.A simple pinhole camera consists of three parts;a photographic film,a pinhole aperture sheet and object.pin hole apparatus

In this simple device the image formation of a stationary object is formed on a photographic film or a white paper sheet.Those light rays that passing through the hole form the image of the object.In the figure such two rays emerging from object and passing through the hole and form image of the object,the image formed by this device is inverted.The image size is directly proportional to the separation between pinhole screen and photographic screen.For a sharp image formation the size of pinhole must be much less than size of the object,otherwise blur image will be formed.This figure shows that light travels in straight lines.

Dispersion of light

“The splitting of white light into its component colours is called dispersion of light.”Sunlight is often called white light,although it is a combination of different colours. We can see these colours in a rainbow.These colours are red,orange,yellow,green,blue,indigo and violet.dispersion

We can split white light into its colours by passing it through the prism.The band of seven colours obtained is called spectrum of white light.

Why does white light get dispersed?

When a beam of white light enters a prism,all the colours of white light refract at different angles.It causes the white light to split into its component colours. Red light bends the least.Violet light bends the most and refracts by the largest angle.In this way,white light disperses into its component colours.dispersion through double prism

When this spectrum is again passed through another prism as shown in figure,a beam of white light is obtained.

Rainbow formation

“A rainbow forms when sunlight is refracted and totally reflected by tiny water droplets.”

rainbow formationA rainbow is a natural demonstration of refraction,dispersion and total internal reflection of light.When white light of the sun passes through tiny rain drops suspended after rainfall,a rainbow may appear.Raindrops in the air act like tiny prisms.They refract and reflect the sunlight and then separate it into different colours. The colour scheme of rainbow is the same as in the spectrum made by the prism.Since red colour bends the least and violet colour bends the most from its original path,so in the rainbow,the red colour appears at the top and the violet colour appears at the bottom.The other colours appear in between these two colours.

Colours of light

An understanding of colours is very useful in photography and theater lightings. People who work with lights of different colours must know how to produce lights of various colours from a few basic colours. The colours that can be used to make any other colour are called primary colours to produce white light.primary colours

Red + Blue +Green =White

When two primary colours mix,they produce a secondary colour. Cyan,yellow and magenta are secondary colours. A colour television uses different combinations of colours.

secondary coours

Red + Green = Yellow

Red + Blue =Cyan

Blue + Green =Magenta

We can obtain other colours of light by mixing lights of primary and secondary colours.

Colours of objects:

When white light shines on non luminous objects they reflect some colours and absorb all others.The colour of an object is the colour of light it reflects.A red object appears red because it reflects red colour of light and absorbs all the other colour. The grass of our lawn appears green as it reflects green light into our eyes.Why does black car appear black?

When all the colours of light are reflected into our eyes,the object appears white.And,when all the colours of light are absorbed by the object,it appears black.Black objects do not reflect any light.Objects of colours reflect mixture of colours.

Watch also:

See also:

Reflection of light

Refraction of light

About admin

Leave a Reply

Your email address will not be published. Required fields are marked *

*

x

Check Also

difference between fresnel and frounhofer diffraction

what is Fresnel’s diffraction? Fresnel diffraction can be observed if the source of light and ...